Modeling paste with oil and wax. It has a very low melt point and when...
Tags
Plasticrète is a water-based acrylic resin that forms a solid mass with the special hardener. Shore A: 82-86 Frost resistance: -18°C/+30°C Powder + resin. Ratio: 2/1
300g/m2 Chopped Strand Mat D5 is used to strenghten the plasticrete. Due to its big holes, the mass can easily stream through.
Chopped glass fibers are being used for processing with polyester resins, polyurethanes and epoxies, for the strengthening of polyester glues and fillers. Can be added to plaster for foundry.
Based on high boiling waxes and aliphatic hydrocarbons Creamy release agent for epoxy and polyurethane. Work good for plasticrete on polyester. Must be applied on surfaces pre-treated with PVA release agent. The PVA coat is not necessary on not absorbing surfaces. Brush 2-3 layers, waiting 2-3 minutes after each layer to let it dry. The coat can be...
Creamy release agent. The vaseline also serves as a release agent for silicon rubber on silicon rubber, latex, resins (on the outside), silicon rubber on the skin, application on the skin, face, hairs, …